Introduction to rotary hob fiber cutting machine.

Rotating hob type fiber cutting machine rotating hob type is the use of continuously rotating drum type cutter plate, according to a certain position and direction slope, the direction of the blade is the direction of rotation of the cutter plate, with a one-piece fixed straight blade, the cooperation between the two tools is very compact and fit, continuously rotating multiple pieces of rotary knives, the raw materials sent from the feeding system are automatically tightened and cut off, and then automatically transported out of the cutting system through the transmission belt.

In the material feeding system, it adopts parallel and uniform conveyor belts of different lengths. At the front end of the blade, there are two pairs of relatively rotating self-sliding pressure regulating pressure clamping materials. In normal production, the materials can be easily placed continuously flat on the conveyor belt and automatically fed into the compression device and the cutting tool at a uniform speed to complete the cutting. After the cutting, the material falls into the output belt along the direction of the outlet and is sent out.

Features:

(1) The cutter plate of this fiber cutting machine can be installed with 1-10 pieces of rotating tools, with a length of 400-800mm; (2) The degree of cutting material can reach 1-100mm; (3) The degree of cutting is between 5-150mm; (4) The cutting efficiency is high, and the length accuracy is high. (5) The number of cuts is as high as more than 200 times per minute, which can be applied to all kinds of waste cloth scraps, old clothing, cotton wool, chemical, glass fiber, textile silk, leather, carton, plastic film and other random measurement rules, no direction Soft materials are broken and chopped, (6) In the state where the rotation speed of the cutter disc is unchanged, if the travel speed of the conveying device is changed, the length and size of the cut material will be released and changed, which is more suitable for a large number of different specifications and cutting requirements of the work needs.

In the papermaking and paper packaging industry, a large number of waste paper edges, newspapers, paper shells, packaging boxes, packaging bags and other items are stacked to take up a large amount of space, and manual processing is cumbersome, which restricts the fineness of processing. A large number of such raw materials are continuously placed on the automatic conveyor belt of the cutting machine with a shredder, which can be automatically initially compressed, compressed and then continuously chopped to achieve a good volume utilization effect.In the protection of key intellectual property rights, as well as well-known packaging, trademarks, signs, etc., to prevent them from being used again by certain criminals to harm the country and the people and seek windfall profits.We can chop and break these.