The maintenance of the equipment of the loosening machine is related to whether the quality and output can be stably maintained in the later stage of the loosening machine.Loosening machine manufacturers should strengthen the management of the corresponding loosening machine staff, unify the operation method, and add the maintenance of the loosening machine to the normal production management track.Below, Xiaobian will briefly introduce to you how to clean and maintain the loosening machine.
In the cleaning of the loosening machine, it is necessary to open the protective cover on the pressure surface of the loosening machine, open the control box, and do a good job of cleaning. The main task is to clean up the bristles in the electromagnetic clutch, as well as the oil stains around the pedal box. Also clean up, you need to clean up the bristles inside the control box.When checking the yarn loosening device and tension device of the loosening machine, remove the hairs accumulated on the edge of the yarn, and check the guide needle and yarn guide to keep it smooth. When checking Zhang Li, check the loosening of the screws.
The manufacturer of the loosening machine recommends regular inspection of the loosening machine. During the inspection process, carefully check whether the side support of the loosening machine is bent or damaged, because the requirements for the assembly specifications of the side support of the loosening machine are relatively high, so if the side support is damaged or the location assembly is not standardized, it will affect the operation process of the loosening machine, so it is necessary to do a good job in the inspection and maintenance of the loosening machine, which is also a process of maintaining the loosening machine.
