What are the factors that affect the opening effect of the equipment?

        This is a kind of equipment that is mainly used for removing impurities in various fiber fields. The opener is mainly used to loosen materials such as fibers, cotton, and textiles. However, there are many factors that will affect the opening effect of the opener, so let me introduce the factors that affect the effect of the opener.

         1. The gap between the needle teeth between the feed roller and the licker-in: This gap should be determined according to the length of the fibers of the opener. If the length of the fibers to be spun is long, the gap can be larger; If the length of the fiber is short, the gauge should be smaller, and the specific gauge should be controlled according to the length of the fiber and production experience.

         2. Speed of licker-in: In production, if the speed of licker-in is fast, the number of times of opening per unit length of the feed material increases, and the opening force also increases accordingly, so the opening effect is enhanced. However, as the speed of the licker-in increases, the fibers are easily torn off during the high-speed rotation of the licker-in. Therefore, in the process of opening, especially when the fiber block is large and the opening resistance is large, the speed of the licker-in should not be too large.

        3. The speed of the fan: the speed of the fan should be properly selected. If it is too fast, the fiber block will be sucked away by the fan before it can be opened; if it is too slow, the fiber cannot be transferred in time, and it is easy to be kneaded into fiber block.

        4. The state of the licker-in card clothing: the opening machine card clothing should be very sharp, so as to pierce the fibers well, enter the fibers for opening, the needle teeth should be smooth, and the needle surface should be flat and wear-resistant to prevent the fibers from hooking. , entangled in the needle tip and cannot be transferred well.